Toshiba 37AV600E - REGZA -37" HD Ready LCD MultiSystem TV PAL/NTSC Owner's Manual page 31

4
Press u or U to select an option you want to
adjust. Press I or i to adjust the settings as
required.
Horizontal Position
Note:
When you set the Vertical Position, the screen
may not be changed even if changing the cursor
position.
Adjusting the clock phase of the picture
If the clock phase, which synchronize the PC
signal and LCD display, is not optimized, the
picture will blur.
This function enables you to adjust clock phase
and display a clear picture.
1
From the PC Settings menu, press u or U to
select Clock Phase.
2
Press I or i to obtain a clear picture.
Clock Phase
Adjusting the sampling clock
If the sampling clock does not match with the dot
clock frequency of the PC, blurred picture detail
will occur, or screen width will change, or drift
patterns in vertical lines may be apparent.
This function enables you to adjust it and
optimize the picture.
1
From the PC Settings menu, press u or U to
select Sampling Clock.
2
Press I or i to optimize the picture.
Sampling Clock
Resetting the PC setting
The Reset function adjusts the PC Setting to the
factory settings.
1
From the PC Settings menu, press u or U to
select Reset.
2
Press Q.
Note:
When a PC is connected using HDMI none of
these function will be available.
Connecting your TV
0
0
0
31