Activating the DNR (Digital Noise
Reduction)
If the receiving signal is weak and the picture is
blurry, the picture may be improved when using
this function.
1
From the Picture settings menu, press u or
U to select DNR on the 2nd page.
2
Press I or i to select Off, Low, Middle or
High.
DNR
Note:
This function is available for 480i and 576i
signals.
Selecting the colour temperature
You can change the tone of the picture by
selecting from three preset colour temperatures:
Cool, Natural or Warm.
1
From the PICTURE menu, press u or U to
select Colour Temperature.
2
Press I or i to select mode you prefer.
Colour Temperature
Cool
: Lends a blue hue to the picture.
Natural : Neutral
Warm
: Lends a red hue to the picture.
Adjusting the colour management
You can adjust the picture colour quality by
selecting from 6 base colour adjustments : Red,
Green, Blue, Yellow, Magenta or Cyan.
1
From the PICTURE menu, press u or U to
select 3D Colour management.
2
Press I or i, then press I or i to select On.
3D Colour management
3
Press Q, then press u or U to select Base
colour adjustment.
4
Press Q, then press u or U to select an item
you want to adjust.
Base colour adjustment
Red
Green
Blue
Yellow
Magenta
Cyan
Reset
MENU
Back
Using the TV's features
Middle
Cool
On
Hue
Saturation Brightness
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
OK
EXIT
Watch TV
5
Press i, then press I or i to select Hue,
Saturation or Brightness.
Hue
0
MENU
Back
6
Press u or U to adjust the settings as
required.
Notes:
• If you select colour management Off mode, this
mode is not available.
• In the PC input mode (- page 30), this mode
is not available.
Resetting the base colour adjustment
The Reset function adjusts the base colour
adjustment to the factory settings.
1
From the Base colour adjustment menu,
press u or U to select Reset.
2
Press Q.
Using the active backlight control
In order to improve screen visibility, the active
backlight control sets the screen brightness
automatically during dark scenes.
1
From the PICTURE menu, press u or U to
select ActiveBacklightControl.
2
Press I or i to select On or Off.
Using the cinema mode
A movie fi lm's picture runs at 24 frames a
second, whereas movie software such as DVD,
etc., that you enjoy watching on TV at home runs
at 30 (NTSC) or 25 (PAL) frames a second. To
convert this signal to reproduce a smooth motion
and picture quality, select the On mode.
Effective signal and setup conditions:
• When the Video input mode is selected.
• When the input signal format is 480i and 576i
signals.
1
From the PICTURE menu, press u or U to
select Cinema Mode.
2
Press I or i to select On or Off.
Note:
When a DVD movie with subtitle is playing back,
this mode may not work correctly.
Red
Saturation
Brightness
0
0
EXIT
Watch TV
19