Using The Pc Setting - Toshiba 37AV600E - REGZA -37" HD Ready LCD MultiSystem TV PAL/NTSC Owner's Manual

To connect a PC to the HDMI terminal on the
TV:
When connecting a PC to the HDMI terminal on
the TV, use an HDMI-to DVI adapter cable and
analogue audio cables.
If connecting a PC with an HDMI terminal, use
an HDMI cable (type A connector). Separate
analogue cables are not necessary.
TV back view
Computer
For acceptable signal format, see page 27.
Notes:
• The edges of the images may be hidden.
• If receiving a 720p, 1080i or 1080p signal
programme, PC mode scales the video to
display the entire picture within the borders of
the screen (e.g. no overscanning) (- page
17).
• If connecting a certain PC model that signal is
particular, the PC signal may not be detected
correctly.
30
Connecting your TV
TV back view
Audio cable
for PC-to-TV
connection

Using the PC setting

• In the PC input mode, you cannot select the
Colour, Tint, Sharpness, Black/White Level,
MPEG NR and DNR in the Picture settings
menu, 3D Colour management, Base colour
adjustment, ActiveBacklightControl and
Cinema Mode in the PICTURE menu (- page
18, 19).
• In the PC input mode, the Manual setting
(- page 23) is not displayed.
• First press o until the video input mode list
appears on the screen, then press u or U and
Q in order to select the PC input mode (-
page 23).
• This function may not be available for some
signal or if no signal is received.
• The optimum points of the clock phase
and sampling clock adjustments may be
incomprehensible according to the input
signals.
Adjusting the picture size/position
1
Press MENU, then press I or i to display the
SETUP menu.
Language
AV connection
PC Settings
MENU Back
2
Press u or U to select PC Settings.
Language
AV connection
PC Settings
MENU Back
3
Press Q to display the PC Settings menu.
Horizontal Position
Ver tical Position
Clock Phase
Sampling Clock
Reset
MENU
Back
SETUP
English
OK
OK
EXIT Watch TV
SETUP
English
OK
OK
EXIT Watch TV
PC Settings
0
0
0
0
OK
EXIT
Watch TV