Table of Contents
Advertisement
Programming channels into the TV's
channel memory
• First, use the Auto tuning function to preset all
the active channels in your area automatically.
Then, arrange the preset channels with the
Manual tuning function so that you can tune
into only desired channels.
• Use the Manual tuning operation if desired
channels cannot be preset with the Auto
tuning or if you would like to preset channels to
specifi c position numbers one by one.
Programming channels automatically
1
From the SETUP menu, press u or U to
select Auto tuning.
2
Press Q to start the automatic search.
The search will begin for all available stations.
Searching
POS: 02
EXIT
Stop
The slide bar will move along the line as the
search progresses.
If you make a mistake, simply repeat steps
1-2 to start again from the beginning.
3
When the automatic search is completed,
the TV will automatically return to the fi rst
programme position.
4
Press PB or Pb to view the programmed
position.
Note:
When you preset the programme channel which
sound of broadcast transmission system adopts
"M" system, the sound system may not be tuned
correctly if the radio waves transmit badly. At that
time, preset the channel by Manual tuning.
The countries such as Myanmar, Brazil, Chile,
Colombia apply to this case. See page 33 for
more details.
14
Auto tuning
Getting started
Manually setting channels in the channel
memory
1
From the SETUP menu, press u or U to
select Manual tuning.
2
Press Q to display the Manual tuning menu.
Press u or U to select the programme
position you want to arrange.
3
Press Q to display the breakdown menu.
Press I or i to select an item, then press u or
U to select the item as shown below.
A. Programme position selection
B. Sound system (- page 33)
C. Colour system (- page 33)
A : Automatic (factory set), P : PAL,
S : SECAM, N4 : NTSC 4.43 (MHz),
N3 : NTSC 3.58 (MHz)
If the colour of a certain channel is
abnormal, the automatic colour system
selection (A) may have malfunctioned, or
sound system selection is wrong. In such
a case, select another colour and/or sound
system (- page 33).
D. Programme position skip selection
Press u or U to turn the programme
position skip option on "8" or off "(".
The programme position will then be
skipped when you select channels with PB
or Pb.
The "8" mark will appear beside a
programme position number when you use
the Number button on the remote control.
Manual tuning
Prog.
Label
1
2
3
4
5
6
OK
Select
Sort
MENU
Back
EXIT
Watch TV
Manual tuning
Programme
1
A
0
B/G
OK
Store
MENU
EXIT
Back
Watch TV
G
A
C
E
B
D
F
Hide quick links:
Advertisement
Table of Contents
