Toshiba 37AV600E - REGZA -37" HD Ready LCD MultiSystem TV PAL/NTSC Owner's Manual page 17

Native
Use this setting for PC connected via HDMI.
When receiving video signal source via HDMI
input, this setting will display the image correctly
without distortion or picture clipping.
Notes:
• In the aerial input signal mode, the picture size
selections are Wide, Super Live 2, Cinema
2, 4:3, Super Live 1, Cinema 1, Subtitle and
14:9.
• In the PC input mode (- page 23), the picture
size selection is wide or 4:3 only.
• In the teletext mix mode (- page 25), the
picture size selection is wide or 4:3 only.
• Using the special functions to change the
size of the displayed image (e.g. changing the
height/width ratio) for the purpose of public
display or commercial gain may infringe on
copyright laws.
• If the aspect ratio of the selected format is
different from the one of the TV transmission
or video programme, it can cause a difference
in vision. Change to the correct aspect ratio
picture size.
• When using the PC mode, the moving image
quality may be deteriorated.
Using the picture still
• Press r to freeze the picture.
Even if an image is frozen on the TV screen, the
pictures are running on the input source. Audio
continues to be output as well.
To return to a moving picture, press r again.
( M ov ing)
Notes:
• If you use this function except for the purpose
of your private viewing and listening, it may
infringe the copyright protected by the copyright
laws.
• In the PC input mode (- page 23), this
function is not available.
Using the TV's features
Adjusting the picture position
Adjustment to the position of the picture may be
made to suit your viewing preferences.
1
2
3
4
Notes:
• When the picture size is in Wide or 4:3 mode,
• When the picture size is in PC mode, the
Resetting the picture position
This function resets your picture position settings
to the factory settings.
(St i ll )
1
2
Press MENU, then press I or i to display the
SETUP menu.
Language
Auto tuning
Manual tuning
AV connection
Picture Position
MENU EXIT
Back
Press u or U to select Picture Position.
Press Q, then press u or U to select an item
you want to adjust.
Picture Position
Horizontal Position
Ver tical Position
Reset
MENU Back EXIT
Press I or i to adjust the settings as required.
Horizontal Position
only the Horizontal Position can be adjusted.
picture position cannot be adjusted.
From the Picture Position menu, press u or
U to select Reset.
Press Q.
SETUP
English
OK
OK
OK
OK
Watch TV
0
0
OK
Watch TV
0
17