Watching Tv Programmes; Selecting The Video Input Source To View; Channel List; Selecting The Pc/Hdmi Audio Mode - Toshiba 24PB2 Series Owner's Manual

Watching TV programmes

Selecting the menu language
Choose from 9 different languages (English,
Chinese (CS), Malay, Thai, Vietnamese, Russian,
Arabic, Persian or French) for the on-screen
display.
• Use the menu: SETUP
• Use the item: Language
Changing the position
1
Enter the desired position number using the
Number buttons on the remote control.
For positions below 10, use 0 and the
required number e.g., for position 1.
2
You can also change the position by using
PU or Pu.
The position will be displayed on the screen
with the Mono/Stereo/Dual audio status.
Note:
Changing positions between different format
channels takes several seconds.
Switching between two positions
You can switch two positions without entering
actual position number each time.
1
Select the fi rst position you want to view.
2
Select the second position with the Number
buttons (0-9).
3
Press . The previous channel will be
displayed.
Each time you press
back and forth between the two positions.
Changing the position
1
Press to display the following on-screen
information.
4
ABCD
The information will disappear in 6 seconds.
To erase the display instantly, press
Sorting positions
Ex.: To swap channel ABCD (Prog.1) for channel
MNOP (Prog.4):
1
From the SETUP menu, press  or  to
select Manual Tuning menu, and then press
Q.
, the TV will switch
Stereo
again.
– 11 –
2
Press  or  to select the channel ABCD,
then press .
Manual Tuning
Pos. Label
1 A B C D
2 E F G H
3 I J K L
4 M N O P
5
3
Press  to select the new position "4", then
press .
4
Press  to select the channel MNOP, then
press .
5
Press  to select the new position "1", then
press .
6
Confi rm new Manual Tuning menu.

Selecting the video input source to view

1
Press on the remote control until
the video input mode list appears on the
screen, then press ,  or
appropriate input source (or press o on the
TV left side panel to select required input
source directly).
2
Press OK.
TV (analogue aerial input),
VIDEO (o COMPONENT / VIDEO INPUT,
standard or component video input),
HDMI (HDMI input),
PC (o RGB/PC, PC input)
Setting the Manual Setting menu
When the standard video input mode, this
function is available.
• Use menus: SETUP and Manual Settings
• Use items: Colour System and Label

Channel List

1
Press the button. The Channel List will
appear.
2
Press  or  to select a channel, and press
Q to watch.

Selecting the PC/HDMI Audio mode

You can select PC audio or HDMI audio when
using this function.
• Use menus: SETUP and AV Connection
• Use the item: PC/HDMI Audio
• Use modes: PC and HDMI
to select