Configuring Raid - Western Digital WDG2TP10000N - My Book Pro Edition II Hard Drive Array User Manual

Configuring RAID

My Book Pro Edition II is preformatted for HFS+ (Journaled) and is preconfigured for
RAID 0 (Striped) mode for maximum capacity and accelerated performance. This
product also supports RAID 1 (Mirrored) mode for data protection which dedicates
half the capacity to mirror the data in both drives A and B.
1. To configure or change the RAID setting, click on a device from the menu to
display the popup menu.
2. Select the desired RAID configuration and device format and click Configure.
Important: Before you proceed, make sure to back up all files stored in My Book
onto another storage device.
3. When prompted to confirm, click Configure again.
MY BOOK PRO EDITION II
USER MANUAL
MY BOOK RAID MANAGER FOR MAC – 8