Connecting The Device - Western Digital WDG2TP10000N - My Book Pro Edition II Hard Drive Array User Manual

Connecting the Device

3
Macintosh ®
1. Turn on your computer.
2. Insert the software CD into the CD-ROM drive.
3. Double-click the CD-ROM drive icon, the My Book drive icon, then the Mac
folder, which contains the software for this device.
4. Double-click My Book RAID Manager to install this program into the
Applications folder.
5. WD Button Manager Software disk image contains the installer required to enable
the capacity gauge and Safe Shutdown
program into the Applications folder.
6. If you want to install the backup software now, double-click the EMC
Retrospect
prompted.
7. Connect the unit's power cord and interface cable (USB, FireWire 800, or
FireWire 400) as shown above, after which the unit mounts to the system.
®
Express icon in the Mac folder and follow the instructions as
. Double-click this icon to install the
™
CONNECTING THE DEVICE – 5
MY BOOK PRO EDITION II
USER MANUAL
®