Turning Off/Disconnecting The Device; Auto-Off; Safe Shutdown; Safe Removal - Western Digital WDG2TP10000N - My Book Pro Edition II Hard Drive Array User Manual

Turning Off/Disconnecting the Device

7

Auto-off

My Book turns off automatically when you shut down the computer. You also may
follow these steps to turn off the device.
Important: To prevent data loss, close all active windows, files, and applications
before shutting down the device, which will otherwise prevent successful safe
shutdown.

Safe Shutdown

The Power button features Safe Shutdown, which prevents the inadvertent powering
down of My Book until all data is written to the device or system. To engage Safe
Shutdown, press the Power button once. You may hear the device power down
before the Power LED turns off. My Book is now shut down properly and may be
safely disconnected.
Safe Shutdown is enabled only through installation of its driver, which must be
installed on each system to which My Book is connected.

Safe Removal

Mac
Drag the My Book icon to the Trash icon for proper dismount. You may hear the
device power down as the Power LED flashes. When the Power LED is steady, you
may press the Power button once or disconnect My Book's power cord to turn it off
safely.
Windows
Right-click on the WD Button Manager icon in your system tray and point to
My Book... > Safely Remove. You can also right-click the Safely Remove
Hardware icon
may hear the device power down before the Power LED turns off. My Book is now
shut down properly, and you may disconnect the device safely.
™
in your system tray and select Safely Remove Hardware. You
MY BOOK PRO EDITION II
TURNING OFF/DISCONNECTING THE DEVICE – 17
USER MANUAL