BIXOLON 275C - SRP Two-color Dot-matrix Printer User Manual page 63

CHAPTER 4
Control commands list
GS r
[Name]
[Format]
[Range]
[Description]
[Notes]
4-27
Transmit status
ASCII GS
Hex 1D
Decimal 29
n = 1, 2, 49, 50
Transmits 1 byte of status data using n as follows:
n
1, 49 Transmits paper sensor status
2, 50 Transmits drawer kick-out connector status
• Each status is 1 byte.
• The status to be transmitted is as follows:
- Paper sensor status (n = 1, 49)
Bit Binary Hex
00 00
0, 1
11 03
00 00
2, 3
11 0C
4 0 00
5,6 - -
7 0 00
• The status to be transmitted is as follows:
- Drawer kick-out connector status (n = 2, 50)
Bit Binary Hex
0 00
0
1 01
1-3 - -
4 0 00
5,6
7 0 00
r n
72 n
114 n
Function
Decimal
0 Paper near end sensor: paper adequate.
3 Paper near end sensor: paper not present.
0 Paper end sensor: paper present.
12 Paper end sensor: paper not present.
0 Not used. Fixed to Off.
- Undefined.
0 Not used. Fixed to Off.
Decimal
0 Drawer kick-out connector pin 3 is LOW.
1 Drawer kick-out connector pin 3 is HIGH.
- Undefined.
0 Not used. Fixed to Off.
Undefined
0 Not used. Fixed to Off.
Status
Status