BIXOLON 275C - SRP Two-color Dot-matrix Printer User Manual page 52

ESC u
[Name] Transmit peripheral device status
[Format] ASCII
Hex
Decimal
[Range] n = 0, 48
[Description] Transmits the peripheral device status of 1 byte.
[Notes] • The peripheral device status to be transmitted is as follows:
Bit
0
1-3
4
5,6
7
ESC v
[Name] Transmit paper sensor status
[Format] ASCII
Hex
Decimal
[Description] Transmits the status of paper sensor(s) as 1 byte of data.
[Notes] • The paper sensor status to be transmitted is as follows:
Bit
0,1
2,3
4
5,6
7
ESC {
[Name] Turn upside-down printing mode on/off
[Format] ASCII
Hex
Decimal
[Range] 1 ≤ n ≤ 255
[Default] n = 0
[Description] Turns upside-down printing mode on or off.
- When the LSB of n is 0, upside-down printing mode is turned off.
- When the LSB of n is 1, upside-down printing mode is turned on.
ESC u n
1B 75 n
27 117 n
Binary Hex Decimal
0
1
- - -
0 00 0
- - -
0 00 0
ESC v
1B 76
27 118
Binary Hex Decimal
00 00 0
11 03 3
00 00 00
11 0C 12
0 00 0
- - -
Off 00 0
ESC { n
1B 7B n
27 123 n
Status
Drawer kick-out connector pin 3 is LOW.
Drawer kick-out connector pin 3 is HIGH.
Undefined.
Not used. Fixed to Off.
Undefined.
Not used. Fixed to Off.
Status
Paper near end sensor: paper adequate.
Paper near end sensor: paper near end.
Paper end sensor: paper present.
Paper end sensor: paper not present.
Not used. Fixed to Off.
Undefined.
Not used. Fixed to Off.
4-16