Preset View; Other View - Samsung SHR-5082-250 User Manual

PRESET VIEW

The preset setup allows you to move to a preset
position using the PTZ camera.
Press the VIEW button on the front panel or
remote control in Single Screen PTZ Camera
Control Mode to select Preset.
PTZ
TELE
Auto Pan
Preset
(Example: Samsung Protocol) (Example: Samsung Protocol)
Scroll down the cursor until it reaches the preset
position that you want and you can check it from
the screen to the right.
No. Position Name
1
2
3
4
5
6
7
8
Prev Next

OTHER VIEW

Press the VIEW button on the front panel or
remote control in Single Screen PTZ Camera
Control Mode to use other viewing controls.
Samsung, Pan., Pel.-P, and Pel.-D
protocol PTZ cameras support the
following operations:
 Samsung: Auto Pan/Scan/Pattern
 Pan.: Auto Pan/Sequence/Sort
 Pel.(P,D): Auto Scan/Frame Scan/
Pattern
40_ PTZ camera control
WIDE
VIEW PRESET
Scan Pattern Exit
Exit
PTZ
TELE WIDE
Preset Auto Pan Scan
Samsung
Preset Auto Pan Sequence
Pan.
Preset Auto Scan Frame Scan
Pel.
After you select an operation, press the
ENTER button. Then the selected operation
is marked and starts moving. If you select the
other operation during operation, the previous
operation is unchecked and the selected
operation is marked.
Auto Pan Scan
Preset
(For example, Samsung Protocol) (For example, Samsung Protocol)
If you perform PTZ operations while an operation
is in progress, or enter the Preset Setup or
Camera Menu Setup mode, the current operation
is stopped and unchecked.
Even though the system is restarted during
operation, the set operation starts and remains
marked.
VIEW PRESET
Pattern EXIT
Sort EXIT
Pattern EXIT
Pattern Exit