Connecting The Usb; Connecting The Alarm Input/Output - Samsung SHR-5082-250 User Manual

Connecting to Internet through ADSL

CONNECTING THE USB

1. There are two USB connecting ports on the
front and rear panels of the product.
2. USB Hard Disk, USB CD/DVD, and USB
Memory can be connected through any of
those ports.
3. If the USB HDD is connected to the system,
it should be detected and set through
Menu > System > Storage Setup before
operation.
4. The product provides the HOT PLUG feature
that allows the connection/removal of USB
devices during system operation.
 The USB type of hard disk
should be set to Master.
CAUTION
 If the backup USB device cannot
be formatted in the DVR, format
it as FAT32 using your PC.
For more details, refer to the System
section in Chapter 5 Menu Setup.
CONNECTING THE ALARM
INPUT/OUTPUT
The Alarm IN/OUT ports on the rear of the
product have the following elements:
 5080/5082 Alarm IN/OUT Ports
 5160/5162 Alarm IN/OUT Ports
 ALARM IN 1 to 8 (SHR-5080/5082): Alarm
input port
 ALARM IN 1 to 16 (SHR-5160/5162): Alarm
input Port
 ALARM RESET: When receiving an ALARM
RESET signal, the system clears the current
ALARM input or output signal and resumes
alarm sensing.
 ALARM OUT 1 to 4: Alarm output ports
connecting _15