Backup - Samsung SHR-5082-250 User Manual

backup

If there is a predefined device connected, the
window displays the device information like
the free space and such. You can also use the
BACKUP button on the front of your DVR.
Backup
Start Date / Time
2007-01-31 10:17:10
CH CH 1 CH 2
CH CH 5 CH 6
CH CH 9 CH 10
CH CH 13 CH 14
Folder/Filename 20070131/ 1017
Select / Free : 0.00/410.91M(0.00%)
Backup Dev : CD/DVDW SH-S182D
CD/DVD
To configure the related settings
1. Set the start date and time using the
Direction buttons and the ENTER button.
2. Set the end date and time using the
Direction buttons and the ENTER button.
3. Select a channel for backup using the
Direction buttons and the ENTER button.
4. Optional: If you want to change the current
file name, use the virtual keyboard. The file
name format is HHMM (maximum 4 digits)
and the format of folder is YYYYMMDD.
5. When multiple devices are connected, press
USB Memory at the bottom-left corner to
select a backup device. If you select the
built-in CD or USB CD/DVD, the recording
format is fixed to AVI. When Check is
selected, the file size of the selected time
and channel, and residual memory size of
the device are displayed.
6. When all settings are complete, press Start
to begin the backup process. When the backup
starts, the backup progress is displayed. If you
select Stop on the progress window, the backup
stops. If you select Exit, the screen changes to
the upper menu without stopping the backup.
In case of SHR-5160 and SHR-5080, they
do not include the built-in DVD writer so that
backup function is not available for built-in
CD/DVD.
End Date / Time
2007-03-31 10:17:20
CH 3 CH 4
CH 7 CH 8
CH 11 CH 12
CH 15 CH 16
AVI
Check
Start Cancel
[In Backup Process]
If you press Exit while the backup is in
CAUTION
progress, the screen goes to the upper
menu but it does not affect the backup
process. The running speed of the
product may be lowered while the backup
is in progress.
When performing backup on USB CD/
DVD or memory, you cannot use the
actual capacity of the device because a
part of the capacity is used for the system.
This device doesn't support the backup
for memory cards, flash cards, and
memory sticks such as SD, CF, MMC,
etc. The virtual keyboard does not support
the input of special characters or space.
When the CD or DVD is malfunctioning,
its tray frequently opens and closes, and
then the backup fails. In this case, retry
the backup after exchanging the media.
The backup data could be damaged by
the surface state of the disk when using
WARNING
CD or DVD.
The DVR may restart if you attempt to
eject the backup device while the backup
is in progress.
The file name is created with the start time of
backup data.
(YYYYMMDD)/(HHMM+ four digits of the serial
number)
The backup file can be separated in the
following conditions:
- Different units in file size (1GB for DVD, 2GB
for others)
- Change in recording conditions
- Discontinuous recording data
Codec is required to play an AVI backup file,
which is also copied along with the installation file
in the AVI backup process. Run a codec setup
file, "MP4Codec.exe", to install the codec on the
PC. "INDEX.xml" is included in the AVI backup file,
which enables you to check and enjoy a desired
file at your convenient time. In case of USB
external HDD and USB Flash Memory, the backup
is available only with formatting FAT32 partition.
To format FAT32, Format the device as FAT32 in
the PC or erase the device in the Storage Setup
menu, which enable to backup files.
In case of back-up devices, please check the
compatibility list of the storage devices. The
list of the compatible devices with Samsung
DVR can be obtained from your vendor.
The backup of the AVI format may take longer
depend on a number of the channel and the DVR
operation environment (e.g. recording, network)
In case of SHR-5082/5080, only 8 channels
are displayed.
backup _37