Table of Contents
Advertisement
Altos R5250 Installation Configuration Guide
Please insert the EasyBUILD 8.0 build 100 into the optical drive.
Expand Drivers -> Altos R5250 -> Graphics adapters -> ATI FireGL V5200,
4.
select Windows XP x64 and click on Setup.
Follow the instruction to install the VGA driver.
5.
At Select Components, please click on Express.
6.
Please reboot the server after the driver is installed. You would see ATI
7.
FireGL V5200 and ATI FireGL V5200 Secondary listed in Display adapters in
Device Manager.
After the system rebooted, if you see the following message on the
8.
screen.
Please right-click on desktop and select Properties.
9.
Select Setting tab, Change the setting of Display to 1. Plug and Play
10.
Monitor and ATI FireGL V5200 and click on Advanced.
Select Troubleshoot tab, change the setting of the Hardware acceleration
11.
to Full and apply the setting. You will not see the message again.
Checking the Device Manager, you would see ATI FireGL V5200 and ATI
12.
FireGL V5200 Secondary listed in Display adapters in Device Manager.
RAID Utility Installation
For installing MegaRAID Storage Manager for SAS daughter board, please
1.
insert the EasyBUILD 8.0 build 100 into the optical drive.
Expand Utilities -> Altos R5250 -> SAS Daughter Board, select MegaRAID
2.
Storage Manager (Windows Server 2003) and click on Setup.
Follow the instruction, accept the license agreement and use the default
3.
setting to the Setup Type.
At Setup Type, please select StandAlone.
4.
Follow the instruction again to complete the installation.
5.
Network Utility Installation
The ForceWare Network Access Manager is included in the chipset driver
package. The ForceWare Network Access Manager will be installed
automatically when you installing the chipset driver package.
40
Advertisement
Table of Contents
