Table of Contents
Advertisement
Altos R5250 Installation Configuration Guide
Drivers Required
For SUSE Linux Enterprise Server 10 Installation, the following device drivers are
required.
Device
Onboard SATA
RAID
Onboard NVIDIA
NFP 3600 Chipset
Onboard NVIDIA
nForce Networking
Controller
Onboard XGI Z9s
ATI FireGL V5200
Software Required
The management utility for onboard SATA RAID can be found in the EasyBUILD
8.0 build 100 (or later).
Software
Onboard SATA
RAID Utility
Installation Tips
Since SUSE Linux Enterprise Server 10 cannot recognize the onboard SATA
1.
RAID, you need to make a driver diskette from the EasyBUILD 8.0 build
100 first before the installation.
Boot the system form SUSE Linux Enterprise Server 10 disk1 bootable CD.
2.
When you see the boot menu on the screen, press F5 and select Yes.
3.
Press Enter to continue the installation.
4.
Insert the driver disk to the floppy, select sda: Floppy and OK to load the
5.
onboard SATA RAID driver from the driver diskette.
After loading the driver, select OK and Back to return to the installation.
6.
If you have installed the ATI FireGL V5200 in the system, you need to
7.
install addition packages during the OS installation. If you are using
onboard XGI Z9s, please go to step 13 directly.
At Installation Setting, select the Software.
8.
Check C/C++ Compiler and Tools under Development to add C/C++
9.
compiler tools.
Click on Details, change the Filter from Patterns to Package Groups.
10.
Select the Source under Development in left window and check kernel-
11.
source in the right window to add the kernel source.
110
Version
Directory on EasyBUILD
9.37
\Disk\R5250\onboard\sataraid\sles10\
N/A
OS built-in
0.62
\Disk\R5250\nic\Nvidia\sles10\
1.12.03
\Disk\r5250\onboard\xgiz9s\sles10\
8.35.5
\Disk\R5250\graphic\V5200\sles10\
Version
Directory on EasyBUILD
N/A
N/A
Advertisement
Table of Contents
