Table of Contents
Advertisement
Altos R5250 Installation Configuration Guide
Windows?" page, click on Next to continue the installation.
7.
Follow the instructions to finish the installation.
Chipset Driver Installation
1.
Please insert the EasyBUILD 8.0 build 100 (or later) into the optical drive
2.
Expand Drivers -> Altos R5250 -> Chipset and double-click on Windows
Vista x64.
3.
Follow the instruction and use the default setting to install all of the
drivers and utilities in the driver package.
4.
After all drivers and utilities are installed, please reboot the system.
Gigabit Ethernet Driver Installation
The Gigabit Ethernet driver is included in the chipset driver package. The
Gigabit Ethernet driver would be installed automatically when you installing
the chipset driver package.
RAID Utility Installation
For installing the MegaRAID Storage Manager for the SAS daughter
1.
board, please insert the EasyBUILD 8.0 build 100 (or later) into the optical
drive.
Expand Utilities -> Altos R5250 -> SAS DAUGHTER BOARD, select
2.
MegaRAID Storage Manger (Windows Vista x64) and click on Setup.
Follow the instruction, accept the license agreement and use the default
3.
setting to the Setup Type.
At Setup Type, please select StandAlone.
4.
Follow the instruction again to complete the installation.
5.
Windows Vista Enterprise x64 Edition Installation (SAS RAID
Daughter Board)
Below information describes how to manually install Windows Vista Enterprise
x64 Edition on Altos R5250 SAS RAID daughter board installed.
Drivers Required
For Windows Vista x64 Installation, the following device drivers are required.
Device
SAS RAID Daughter
Board
Onboard NVIDIA
NFP3600 Chipset
Onboard NVIDIA
nForce Networking
56
Version
Directory on EasyBUILD
09.25.1029.20
\Disk\r5250\raid\sas1068\x64\vista\
07
Package 1502
\Disk\R5250\onboard\Chipset\x64\vista\
65.7.4.0
Including in chipset driver package
1502
Advertisement
Table of Contents
