Table of Contents
Advertisement
chipset driver package.
VGA Driver Installation (onboard XGI Z9s)
Windows 2003 will treat onboard VGA as Standard VGA device. You can
1.
find the XGI Z9s driver in EasyBUILD 8.0 build 100. Please insert the
EasyBUILD 8.0 build 100 into the optical drive.
Expand Drivers -> Altos R5250 -> Graphics adapters -> XGI Z9s, select
2.
Windows Server 2003 and click on Setup.
Follow the instruction to install the VGA driver.
3.
Please reboot the server after the driver is installed.
4.
After the system rebooted, you would see XGI Z7/Z9/Z9s/Z11 v1.09.03
5.
listed in Display adapters in Device Manager.
VGA Driver Installation (ATI FireGL V5200)
NOTE. With ATI FireGL V5200 installed, you need to disable onboard VGA
controller first from BIOS before you install the ATI FireGL V5200 driver,
Press F2 during the POST to enter the BIOS. After you entering the BIOS,
1.
select Advanced -> PCI Configuration -> Onboard VGA Control, press
Enter and change the setting from Enabled to Disabled press. And then
press F10 to save configuration changes and reboot system.
After you reboot and entering the OS, you will see one Standard VGA
2.
Graphics Adapter and one Video Controller under Other Device in
Windows Server 2003 Device Manager for ATI FireGL V5200.
You can find the ATI FireGL V5200 driver in EasyBUILD 8.0 build 100.
3.
39
Altos R5250 Installation Configuration Guide
Advertisement
Table of Contents
