Table of Contents
Advertisement
Follow the instruction, accept the license agreement and use the default
3.
setting to the Setup Type.
At Setup Type, please select StandAlone.
4.
Follow the instruction again to complete the installation.
5.
Windows Vista Enterprise Edition Installation (SAS RAID
Daughter Board)
Below information describes how to manually install Windows Vista Enterprise
Edition on Altos R5250 SAS RAID daughter board installed.
Drivers Required
For Windows Vista Installation, the following device drivers are required.
Device
SAS RAID Daughter
Board
Onboard NVIDIA
NFP3600 Chipset
Onboard NVIDIA
nForce Networking
Controller
Onboard XGI Z9s
ATI FireGL V5200
Software Required
The management utility for SAS RAID daughter board can be found in the
EasyBUILD 8.0 build 100 (or later).
Software
MegaRAID Storage
Manager
Configuring SAS RAID Daughter Board
Please refer to the Appendix C. for the SAS Daughter Board Configuration.
Installation Tips
Though Windows Vista can recognize the SAS RAID daughter board
1.
controller, we still replace the driver with the one in EasyBUILD. Please
make the driver diskette from the EasyBUILD 8.0 build 100 first before the
installation.
Please boot the system form the Windows Vista CD/DVD. Follow the
2.
instructions to do the installation.
When you see the "Where do you want to install Windows?" on the
3.
screen, please insert the driver diskette and click on Load Driver.
61
Version
Directory on EasyBUILD
9.25.1029.200
Disk\r5250\raid\sas1068\vista\
7
Package 1502
\Disk\R5250\onboard\Chipset\vista\
65.7.4.0
Including in chipset driver package
1502
6.14.10.900
\Disk\r5250\onboard\xgiz9s\vista\
8.362.0.0
\Disk\R5250\graphic\V5200\vista\
Version
Directory on EasyBUILD
2.30
\app\r5250\raid\lsi1068\Windows\
Altos R5250 Installation Configuration Guide
Advertisement
Table of Contents
