Table of Contents
Advertisement
Altos R5250 Installation Configuration Guide
Checking the Device Manager, you would see ATI FireGL V5200 and ATI
12.
FireGL V5200 Secondary listed in Display adapters in Device Manager.
After you install the driver for ATI FireGL V5200, please also install the
13.
driver for onboard XGI Z9s.
RAID Utility Installation
For installing MegaRAID Storage Manager for SAS daughter board, please
1.
insert the EasyBUILD 8.0 build 100 into the optical drive.
Expand Utilities -> Altos R5250 -> SAS Daughter Board, select MegaRAID
2.
Storage Manager (Windows Server 2003 R2 x64) and click on Setup.
Follow the instruction, accept the license agreement and use the default
3.
setting to the Setup Type.
At the Setup Type, please select StandAlone.
4.
Follow the instruction again to complete the installation.
5.
Network Utility Installation
The ForceWare Network Access Manager is included in the chipset driver
package. The ForceWare Network Access Manager will be installed
automatically when you installing the chipset driver package.
Windows Server 2003 R2 Enterprise x64 Edition SP2 Installation
(SAS RAID daughter board with i-Button)
Below information describes how to manually install Windows Server 2003 R2
Enterprise x64 Edition on Altos R5250 SAS RAID daughter board with i-Button.
Drivers Required
For Windows 2003 x64 Installation, the following device drivers are required.
Device
SAS RAID Daughter
Board
Onboard NVIDIA
NFP3600 Chipset
Onboard NVIDIA
nForce Networking
Controller
Onboard XGI Z9s
ATI FireGL V5200
Software Required
The management utility for SAS daughter board and NIC can be found in the
EasyBUILD 8.0 build 100 (or later).
Software
32
Version
Directory on EasyBUILD
09.25.1029.20
\Disk\r5250\raid\sas1068\x64\ws03\
07
Package 9.18
\Disk\R5250\onboard\Chipset\x64\ws03
\
65.2.0.0
Including in chipset driver package
9.18
6.14.10.0900
\Disk\r5250\onboard\xgiz9s\x64\ws03\
8.323.1.0
\Disk\R5250\graphic\V5200\x64\ws03\
Version
Directory on EasyBUILD
Advertisement
Table of Contents
