Replacing The Processor Liquid-Cooling Assembly - Dell ALIENWARE AURORA - GAMING MACHINE - ALIENWARE AURORA Service Manual

Replacing the Processor Liquid-Cooling Assembly

1. Follow the instructions in "Before You Begin" on page
2. Align the screw holes on the processor liquid-cooling assembly with the
screw holes on the chassis rear wall.
3. Replace the four screws that secure the processor liquid-cooling assembly
to the chassis rear wall.
4. Tighten the four captive screws that secure the processor liquid-cooling
assembly to the system board.
5. Connect the processor liquid-cooling assembly cables to the connectors
(SYS FAN and CPU PUMP) on the top lighting-board.
6. Replace the left side-panel (see "Replacing the Left Side-Panel" on page
7. Connect your computer and devices to electrical outlets and then turn
them on.
6.
11).
CHAPTER 9: PROCESSOR LIQUID-COOLING ASSEMBLY
049
/
049