Removing The Top I/O Panel - Dell ALIENWARE AURORA - GAMING MACHINE - ALIENWARE AURORA Service Manual

Removing the Top I/O Panel

1. Follow the instructions in "Before You Begin" on page
2. Remove the left side-panel (see "Removing the Left Side-Panel" on page
3. Open the PCI shroud (see "Opening the PCI Shroud" on page
4. Remove the drive-bay shroud (see "Removing the Drive-Bay Shroud" on
page 19).
5. Remove the PCI-fan assembly (see "Removing the PCI-Fan Assembly" on
page 44).
6. Remove any PCI-Express cards (see "Removing the PCI-Express Card(s)" on
page 32).
7. Remove the active-venting assembly (see " Removing the Active-Venting
Assembly" on page 84).
8. Remove the right side-panel(s) (see "Removing the Right Side-Panel(s)" on
page 79).
9. Remove the front bezel (see "Removing the Front Bezel" on page
10. Pull the panel insert away from the chassis.
11. Remove the four screws that secure the top I/O panel to the chassis.
12. Disconnect the top I/O panel cables from the connectors on the system
board and master I/O board.
13. Remove the top I/O panel.
6.
11).
18).
90).
1 panel insert
3 screws (4)
1
2
2 top I/O panel
4 top panel
CHAPTER 21: TOP I/O PANEL
4
3
0104
/
0104