Monitor Out - BenQ MS502 User Manual

Function
Selects a baud rate that is identical with your computer's so that you
can connect the projector using a suitable RS-232 cable and update or
Baud Rate
download the projector's firmware. This function is intended for
qualified service personnel.
Selecting On enables the function and the projector displays the grid
Test Pattern
test pattern. It helps you adjust the image size and focus and check that
the projected image is free from distortion.
Closed Caption Enable
Activates the function by selecting On when the selected input signal
carries closed captions.
•
Closed
Caption
Caption Version
Selects a preferred closed captioning mode. To view captions, select
CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary
language in your area).

Monitor Out

Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER 1 jack is
correctly connected to devices. See
to make the connection.
Standby
Audio Pass Through
Settings
Selecting On enables the function. The projector can play sounds when
it is in standby mode. Connect the correct signal cable and connect the
audio cable to the AUDIO IN jack. See
how to make the connection.
Returns all settings to the factory preset values.
Reset All
Settings
Captions: An on-screen display of the dialogue, narration, and
sound effects of TV programs and videos that are closed captioned
(usually marked as "CC" in TV listings).
Enabling this function slightly increases the standby power consumption.
The following settings will still remain: Phase, H. Size, User 1, User 2,
Language, Projector Position, High Altitude Mode, Security
Settings and Baud Rate.
Description
"Connection" on page 15
"Connection" on page 15
for how
for
Operation 41