Setting The Presentation Timer - BenQ MS502 User Manual

Saturation is the amount of that color in a video picture. Lower settings produce less saturated colors; a
setting of "0" removes that color from the image entirely. If the saturation is too high, that color will be
overpowering and unrealistic.
6. Press
. The contrast level of the primary color you select will be affected. Every
adjustment made will reflect to the image immediately.
7. Repeat steps 3 to 6 for other color adjustments.
8. Make sure you have made all of the desired adjustments.
9. Press MENU/EXIT to exit and save the settings.

Setting the presentation timer

Presentation timer can indicate the presentation time on the screen to help you achieve
better time management when giving presentations. Follow these steps to utilize this
function:
1. Go to the SYSTEM SETUP: Basic > Presentation Timer menu and press
MODE/ENTER to display the Presentation Timer page.
2. Highlight Timer Period and decide the time period by pressing
of time can be set from 1 to 5 minutes in 1-minute increments and 5 to 240 minutes
in 5-minute increments.
If the timer is already on, the timer will restart whenever the Timer Period is reset.
3. Press
on the screen by press
Selection
Always
1 min/2 min/3 min
Never
4. Press
5. Press
direction by pressing
Selection
Count Up
Count Down
6. Press
reminder by pressing
the last 30 seconds of counting down/up, and a triple beep sound will be produced
when the timer is up.
7. To activate the presentation timer, press
press MODE/ENTER.
8. A confirmation message displays. Highlight Yes and press MODE/ENTER on the
projector or remote control to confirm. You will see the message "Timer is On"
displaying on the screen. The timer starts counting when the timer is on.
To cancel the timer, perform the following steps:
30 Operation
to highlight Gain and adjust its values to your preference by pressing
to highlight Timer Display and choose if you want the timer to show up
ing
Description
Displays the timer on screen throughout the presentation time.
Displays the timer on screen in the last 1/2/3 minute(s).
Hides the timer throughout the presentation time.
to highlight Timer Position and set the timer position by pressing
Top-Left Bottom-Left
to highlight Timer Counting Direction and select your desired counting
/
Description
Increases from 0 to the preset time.
Decreases from the preset time to 0.
to highlight Sound Reminder and decide if you want to activate sound
/
/
.
Top-Right
.
. If you select On, a double beep sound will be heard at
and press
/ . The length
Bottom-Right
/ to highlight On and
/
/
.