Adding Toner - Konica Minolta bizhub PRO 1051 Operation Quick Manual

Adding Toner

Adding Toner

This machine is equipped with a toner hopper (toner storage) for keeping toner of
one toner bottle.
When toner supply runs out from toner bottle and the toner in the toner hopper
becomes low, the message "Ready to copy/print Please add toner" will appear
on the COPY/Machine Status Screen. When the toner in the toner hopper runs
out, the message "Toner has been used up Exchange Toner Bottle" will appear.
Add toner according to the procedure as follows.
• Use the same number toner bottle as described on the label applied
on the inside of the toner unit door. Otherwise, machine trouble may
occur.
• Wrap the used Toner Bottle with the cover that was attached to the
new Toner Bottle. Then put it in the packing box and return it to your
service representative.
WARNING
• DO NOT throw the toner recovery box into a fire. If it is thrown into a
fire, the toner may ignite and cause a dangerous situation.
CAUTION
• Do not leave a toner unit or drum unit in a place within easy reach of
children. Licking or ingesting any of these things could injure your
health.
5-2
Chapter 5: Troubleshooting