Scan to E-mail
5.
Touch [Input Title] or [Input Sentence] to set the title and
sentence of E-mail as required.
In case of entering the
●
address: Go to Step 6
6.
Touch [Manual Input]
and enter the destina-
tion.
Go to Step 8
●
8.
When registering desti-
nation, touch [Register].
9.
Touch [Scanning Mode Set].
10.
Set the scanning mode as required.
11.
Press [Start].
• About the procedures to register the destination, refer to User's Guide
(Network Scanner).
4-4
Chapter 4: Scanning Operation
In case of selecting the
●
registered address: Go to
Step 7
7.
Select the destination
from the list.
Go to Step 9
●