Chapter 6: Appendix
10.
Enter the value on the
screen displayed by
touching of [Change]
for [Server Quantity]
and touch [OK].
11.
Set the other setting as required, and touch [OK].
12.
Touch [Exit] to close the Controller NIC Setting screen.
13.
Turn OFF/ON the power of the copier.
• About the details of settings, refer to User's Guide (POD Administrator's
Reference).
• About the Administrator mail address settings, refer to User's Guide (POD
Administrator's Reference).
About the network setting of this machine
1
2
3
4
p.1-2
5
6
7
6-7