Configuring A Netware Server For Printing - Oki ES3640eMFP Configuration Manual

2
2-36 Setting up Network Servers
When the Fiery is configured to connect to a NetWare server, it
polls the NetWare server for jobs in each of its queues. If jobs are
found, they are automatically transferred over the network to the
matching connection on the Fiery. For example, jobs from the
NetWare queue with the _print extension are sent to the Fiery
Print queue. While a job is processed and printed, a record of the
job is being created. You can access the Job Log containing these
records at any time.

Configuring a NetWare server for printing

The following sections explain how to set up a NetWare file server
so networked users can print to the Fiery from their workstations,
and the Fiery can obtain print jobs from the NetWare server.
For each NetWare file server that you configure, follow these
general steps. More detail is provided in subsequent sections and
in your NetWare documentation.
• Make sure the server is connected to a functioning IPX network.
• Log in as the Supervisor on a PC connected to the NetWare file
server.
• For NetWare installations, set up an NDS connection (see
page
• For NetWare in emulation mode, set the bindery context (see
page
• For NetWare in bindery emulation, set up a file server, print
server, and print queue for the Fiery (see
With bindery services, you can route all Fiery print jobs through
the same NetWare file server, or you can configure more than one
file server to handle Fiery jobs.
ES3640e MFP EFI Configuration Guide - 36
2-38).
2-38).
page 2-39).