Oki ES3640eMFP Configuration Manual page 89

4
4-89 Network Setup options
Network Setup
Service Setup
PServer Setup
Bindery Setup
Network Setup
Service Setup
PServer Setup
The Bindery Setup menu is displayed again. You can edit other
connections, choose another Bindery Setup option, or choose Exit
Bindery Setup.
Remove File Server
Remove support for
File server name
This option allows you to select a NetWare file server from a list of
connected file servers and remove the connection to it. You are notified
that you have removed the connection, and the Bindery Setup menu is
displayed again. If you change your mind and do not want to remove any
of the file servers, press the Menu button.
You can choose another Bindery Setup option (such as adding
another file server) or choose Exit Bindery Setup and proceed to
set the polling interval.
Exit Bindery Setup
Choose Exit Bindery Setup after you view a list of IPX file servers,
remove a file server from the list, or connect all the configured NetWare
file servers. After you select Exit Bindery Setup, you return to the
PServer Setup menu.
Polling Interval options
Polling Interval
Whether you use NDS or Bindery services, choose Polling Interval from
the main PServer Setup menu. If you do not reset the interval, the
default value of 15 seconds is used.
NetWare Server Poll Interval in Seconds
1–3600 [15]
Specify the interval, in seconds, at which the Fiery communicates
with the Novell print server to see if there are print jobs waiting.
If you select a short interval, the amount of network traffic
Note:
increases. This may slow down other network jobs.
ES3640e MFP EFI Configuration Guide - 89