Oki ES3640eMFP Configuration Manual page 121

5
5-121 Network Setup
255.255.0.0
through 191
255.255.255.0
191
Note:
administrator before proceeding. In some cases, the required
setting may be different from those listed.
If your TCP/IP network has a gateway and users outside the
gateway plan to print to the Fiery using TCP/IP, enter the gateway
address.
Note:
disable TCP/IP.
Note:
first set the Fiery address to a null address.
AppleTalk
The current AppleTalk zone is displayed in the Protocol2 tab.
ES3640e MFP EFI Configuration Guide - 121
if the IP address starts with a number from 128
if the IP address starts with a number greater than
Confirm the subnet mask setting with your network
The Fiery stores assigned IP addresses, even if you later
If you must assign the Fiery IP address to another device,