Connections - Panasonic KX-MB1500 Operating Instructions Manual

1. Introduction and Installation

1.6 Connections

Caution:
R When you operate this product, the power outlet
should be near the product and easily accessible.
C
* The pictured model is KX-MB1520.
Power cord
R Connect to a power outlet (120 V, 60 Hz).
*1
Telephone line cord
R Connect to a single telephone line jack (RJ11C).
*1
[EXT] jack
R You can connect an answering machine or an
extension telephone. Remove the stopper if
attached, and take care of it appropriately.
Answering machine (not supplied)
*1 KX-MB1520 only
IMPORTANT NOTICE FOR THE USB
CONNECTION
R DO NOT CONNECT THE UNIT TO A
COMPUTER WITH THE USB CABLE UNTIL
PROMPTED TO DO SO DURING THE SETUP
OF MULTI-FUNCTION STATION (page 20).
12
A
B
E
D
*1
For assistance, please visit http://www.panasonic.com/help
Note:
R Do not place any objects within 10 cm (4 inches) of
the right and left sides of the unit.
R If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device (KX-MB1520 only).
Using surge protectors
R The warranty does not cover damage due to power
line surges or lightning. For additional protection, we
recommend using a surge protector (E).
If the unit shares a single telephone line with a DSL
service (KX-MB1520 only)
Fax transmission/reception may be disturbed, noise
interference may be heard during telephone
conversations, or Caller ID (page 42) may not function
properly. Please attach a DSL filter (F) to the telephone
line cord of the unit to prevent this. A DSL filter may be
provided by your DSL service provider.
F