Vcore Transient Test(Dos Mode) - Biostar M7 VIG Test Report

CPU
CH1
Condition 7.Boot the system to the Win98SE environment(Command Prompt Only)
Dos mode and run the stpclk.bat
8.At the main menu ,type "U" to go to the "Utilities Submenu"
9.At the next menu , type "B" to "Enable Stop Clock Throttling"
10.
50.0%~65.0%
11.
12.
61

Vcore Transient Test(Dos Mode)

Athlon XP 2100+
STP CLK
At this menu , type "7" to enable Stop Clock Throttling at the rang of
Press <ESC> tiwce and then "Y" to exit the stpclk.bat program
Measure the Vcore waveform
Vcore Transient waveform
M\B
CH3
VIG/0.91
Vcore
RESULT Pass