Vcore Transient Test(Dos Mode) - Biostar M7 VIF Test Report

Engineering validation test report

Hide thumbs Also See for M7 VIF:

Table of Contents

CPU

CH1

Condition

1.Boot the system to the Win98SE environment(Command Prompt Only)

Dos mode and run the stpclk.bat

2.At the main menu ,type "U" to go to the "Utilities Submenu"

3.At the next menu , type "B" to "Enable Stop Clock Throttling"

4.At this menu , type "7" to enable Stop Clock Throttling at the rang of

50.0%~65.0%

5.Press <ESC> twice and then "Y" to exit the stpclk.bat program

6.Measure the Vcore waveform

Vcore Transient Test(Dos Mode)

Athlon XP 2000+

STP CLK

Vcore Transient waveform

M\B

CH3

VIF/0.90

Vcore

RESULT PASS

Table of Contents