Vcore Ripple Test(Open Up The Dos Editor) - Biostar M7 VIG Test Report

Vcore Ripple Test(Open up the DOS Editor)

CPU
CH1
Condition 1.Boot the system to the Win98SE environment(Command Prompt Only)
Dos mode and run the stpclk.bat
2.At the main menu ,type "U" to go to the "Utilities Submenu"
3.At the next menu , type "B" to "Enable Stop Clock Throttling"
7.At this menu , type "7" to enable Stop Clock Throttling at the rang of
50.0%~65.0%
8.Press <ESC> tiwce and then "Y" to exit the stpclk.bat program.
9.Type "EDIT" to enter the "EDIT" pragram. Press "Alt+F" to open up a
Pop-up menu.
7.Measure the Vcore waveform
67
Athlon XP 2100+
STP CLK
Vcore Transient waveform
M\B
CH3
VIG/1.0
Vcore
RESULT Pass