Tuner Operation - Dual XDM7510 Installation & Owner's Manual

XDM7510

Tuner Operation

Seek Tuning
Manual Tuning
Scan Tuning
Local/Distance
Frequency Spacing
Storing and Recalling
Station Presets
Automatically Store
Preset Scan
8
OPERATION
Press TUNE
next strong station.
Press TUNE
then release. "MANUAL" will momentarily appear in the
display. Press TUNE
move radio frequency up or down one step at a time. Press
and hold to advance quickly. If tuning is not adjusted for 5
seconds, the unit will return to seek tuning mode (default).
"AUTO" will momentarily appear in the display.
Press SCAN to preview strong stations on the current band,
pausing for 5 seconds at each. Press SCAN again to cancel.
Press LO/DX to activate local tuning for strong station
reception only. Press LO/DX again to cancel and resume
Distance tuning (default).
Band
Press BAND to select between FM1, FM2, FM3, AM1 and
AM2 bands.
Press and hold BAND then press TUNE
European frequency spacing. Press and hold BAND then
press TUNE
Up to 18 FM stations and 12 AM stations can be stored. To
store a station, select the desired band and station. Press
and hold the desired preset button (1-6) for more than
2 seconds. When stored, the preset number will appear in
the display. The station can be recalled anytime by pressing
the corresponding preset button.
Note:
Function buttons 7, 8, 9 and 0 apply to MP3/WMA operation
only.
Press AS/PS for more than 2 seconds to automatically store
the six strongest stations in the current band. Automatic
Stations
Local/Distance is activated during the initial band scan.
Press AS/PS for less than 2 seconds to scan presets 1-6
on the current band, pausing for 5 seconds at each. Press
AS/PS again to cancel.
nn ll
or TUNE
nn ll
or TUNE
nn
or TUNE
ll
to select USA frequency spacing (default).
momentarily to seek the
for more than 2 seconds,
ll
momentarily to
nn
to select