XHD6430 OPERATION
General Operation
Faceplate Removal
Semi-Permanent
Faceplate Installation
Power On/Off
Auxiliary Input
Steering Wheel Interface
Volume
Set the Clock
6
Press RELEASE and pull away from the left side to remove.
To re-install, insert right side of faceplate first then push
left side to secure.
Remove trim ring and install supplied #1 x 7/32" Phillips
head screw through left side of mounting frame into faceplate.
Press
Inserting a disc will turn the unit on automatically. Press and
hold
Mode
Press MODE to select between AM/FM, CD player, operation
of iPod
operation are indicated in the display.
Note: CD mode will not appear unless a CD is inserted. USB
mode will not appear unless a USB device is connected.
Operation of iPod mode will not appear unless an iPod device
is connected. Bluetooth mode will not appear unless the
BTM60 Bluetooth module is connected.
Insert 3.5 mm plug to connect your portable audio device.
The steering wheel interface input located on the back of the
Input
head unit allows connection to the PAC (Pacific Accessory
Corporation) SWI-PS interface module (sold separately). Visit
www.pac-audio.com for details.
To configure steering wheel controls, follow the instructions
provided with the PAC SWI-PS interface module. After
installing the interface module, insert the module's 3.5mm
jack into the port on the back of the head unit.
Adjust volume using volume knob (00-46).
Mute
Press
display. Press
Reset
Press to RESET the unit upon initial installation or if
abnormal operation occurs. The reset button is located
behind the faceplate.
Display
Press DISP to select between clock and different types of
information, such as radio frequency, CD track or MP3/USB
song information.
With the unit on, press and hold DISP until the clock begins
to flash, then release. Press TUNE
hours and TUNE
momentarily to save the selected time.
or any other button (except eject) to turn the unit on.
to turn the unit off.
, USB, auxiliary input and Bluetooth modes. Modes of
®
to silence the audio. "MUTE" will flash in the
again to cancel.
ll
to adjust the minutes. Press DISP
nn
to adjust the