Dual XDM7510 Installation & Owner's Manual page 7

XDM7510 OPERATION
General Operation
Audio Press AUD to select between Volume (default), Bass,
Treble, Balance & Fader.
VOLUME BASS TREBLE BALANCE FADER
Bass Press AUD until BAS appears then rotate encoder
left/right to adjust ( -6 minimum / +6 maximum).
Treble Press AUD until TRE appears then rotate encoder
left/right to adjust ( -6 minimum / +6 maximum).
Balance Press AUD until BAL appears then rotate encoder
left/right to adjust (BAL L 12-BAL 00-BAL R 12).
BAL 00 represents equal balance
Fader Press AUD until FAD appears then rotate encoder
left/right to adjust (FAD F 12-FAD 00-FAD R 12).
FAD 00 represents equal fader
Source Audio Memory Individual Bass and Treble settings are retained in memory
for AM, FM, CD, and AUX modes. This allows you to save
the Bass and Treble settings separately for each mode.
Example:
FM tuner mode can have Bass +3 and Treble -1 while CD
mode can have Bass +2 and Treble +2.
Note:
Any adjustment to the Bass or Treble settings automatically
cancels the current EQ curve (if one is selected).
7