Power; General Operation - Dual XD622W Installation & Owner's Manual

XD622W OPERATION

General Operation

Faceplate Removal Press RELEASE and pull away from the left side to remove.
To re-install, insert right side of faceplate first then push
left side to secure.
Power On/Off Press PWR or any other button (except eject) to turn the unit
on. Inserting a CD will turn the unit on automatically. Press
PWR to turn the unit off.
Mode Press MODE to select between AM/FM tuner, weatherband
tuner, CD player and auxiliary input. Modes of operation are
indicated in the display.
Bass Boost Press BASS to activate and deactivate bass boost curve.
Activating this feature will enhance the bass frequencies
when listening to music at all volumes.
Volume
Adjust volume using rotary encoder (00-46).
Programmable Press and hold PWR for 3 seconds to program currently
Turn-On Volume
selected volume level.
Confirmation Beep
Press rotary encoder for 3 seconds to turn confirmation beep
on/off.
Mute Press MUTE to silence the audio. Press MUTE again to cancel.
Preset EQ Curves Press EQ to select between POP, JAZZ, CLASSIC, BEAT, ROCK
and OFF (default) equalization curves. Any adjustment to the
Bass or Treble settings automatically cancels the current EQ
curve.
Display Press DISP to select between clock and radio frequency
(tuner mode) or CD track/elapsed time (CD player mode).
Set the Clock With the unit on, press and hold DISP until clock begins to
flash, then release. Press TUNE to adjust the hours and
TUNE to adjust the minutes. Press DISP momentarily
to save the selected time.
12/24-hour Clock The clock will display 12-hour AM/PM time in U.S. frequency
spacing mode (PM 10:00). In European frequency spacing
mode, the clock will display 24-hour time (22:00).
5