Tuner 2 Setup (Dvb-T); Automatic Scan - DREAM MULTIMEDIA Dreambox DM8000 HD PVR DVD Instruction Manual

12.3.1 Tuner B setup (DVB-T)
The same setup possibilities apply if you are using a second DVB-T tuner in your Dreambox (see chapter
12.3 DVB-t Tuner configuration).

12.4 Automatic scan

If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to
the option "Setup" and press the OK-Button to select.
1. Navigate to the option "Service searching" and press the OK-Button.
• The "Service searching" menu will open up.
2. Navigate to the option "Automatic scan" and press the OK-Button.
• The "Automatic scan" menu will open up.
3. Use the Navigation-Buttons up and down to select the DVB-T Tuner and press the OK-Button.
Note:
The search will only be run once if you are using two tuners of the same type (DVB-S, 2xDVB-T or 2x DVB-C)
since the service list is the same for both of them. It is not necessary to run the search separately for each
tuner.
-66-
Set the "Clear before scan" option to "Yes" if you want to delete
all services before the scan starts.
Otherwise leave the setting to "No" which results in only new
services being added to the channel list. To find the new services
press the Navigation-Buttons up/down and afterwards the green
Options-Button to access the "Satellites" view. You will find them
under "New".
Use the Navigation-Buttons up/down to select a tuner and the
Navigation-Buttons left/right to enable or disable the scan for the
selected tuner.
Press the OK-Button to start the scan for all tuners which option is
set to "Yes".
You can see the progress of the scan here.