Service Selection; Changing Channels Using The Service List; Controlling The Volume - DREAM MULTIMEDIA Dreambox DM8000 HD PVR DVD Instruction Manual

All your settings will be saved now and your Dreambox goes into Deep-Standby-Mode afterwards (saves energy!).

4.2 Service selection

Pressing the Left/Right-Buttons on your Dreambox remote control will take you to the previous or next service.
Pressing the 0 on the Numeric-Keypad will enable you to skip back and forth between the two most recently
watched services. This feature is quite useful during commercial breaks since it enables you to watch another
channel and quickly check if your movies is back on.
Using the Navigation-Buttons left/right you can switch to the 20 last viewed services.
4.3 Changing channel using the service list

4.4 Controlling the volume

-22-
This is the Standby / Restart menu.
Navigate to the desired option and confirm by pressing the OK-
Button.
Sleep timer:
Put your Dreambox into Standby after a duration of time that can
be chosen freely. For more info see chapter 10.
Standby:
Puts your Dreambox into Standby mode.
Restart:
Your Dreambox will be rebooted.
Deep Standby:
Puts your Dreambox into Deep-Standby-Mode.
Pressing the Up/Down-Buttons on your remote control activates
the service list.
Use the Navigation-Buttons up/down to select the desired service
and press the OK-Button to change to the selected service.
The Volume +/- Buttons control the volume of the audio. Pressing
+ will make turn it up and pressing - will turn it down.
Pressing the MUTE-Button mutes the volume. A crossed speaker
symbol will appear on the screen.