Printing On Card Stock Or Custom-Sized Materials - Xerox 3150 - Phaser B/W Laser Printer User Manual

Printing on Card Stock or
Custom-sized Materials
Postcards, 3.5 by 5.83 in. (index) cards and other custom-sized
materials can be printed with your printer. The minimum size is
76 by 127 mm (3 by 5 in.) and the maximum size is 216 by
356 mm (8.5 by 14 in.).
Guidelines
• Always insert the short-edge into the Tray 1 first. If you want
to print in landscape mode, make this selection through your
software. Inserting paper long-edge first may cause a paper
jam.
• Do not load more than 5 cards into the Tray 1 at a time.
• Do not print on media smaller than 76 mm (3 in.) wide or 127
mm(5 in.) long.
• Set margins at least 6.4 mm (0.25 in.) away from the edges
of the material in the software application
1
Open the Tray 1 and the rear output tray.
2
Load print material with print side up and short edge first.
U P M
SING RINT ATERIALS
3
3.21