Using The Manual Feed Mode - Xerox 3150 - Phaser B/W Laser Printer User Manual

3.12
U P
SING RINT

Using the Manual Feed Mode

If you select Tray1(Manual) in the Source option when
changing print settings, you can manually load a sheet of print
material in the Tray 1. Manually loading paper can be helpful
when you want to check the print quality after each page is
printed.
This loading procedure is almost the same as the procedure for
loading in the Tray 1, except you load paper sheet-by-sheet in
the Tray, send print data to print the first page, and press the
button on the control panel to print each following page.
1
Load a sheet of print material on the centre of the Tray 1
with the print side up.
2
Slide the paper width guide and adjust it against the
material without bending.
M
ATERIALS