Common Windows Problems - Xerox 3150 - Phaser B/W Laser Printer User Manual

Problem
"File in Use" message
appears during installation.
"Error Writing to LPTx"
message appears.
"General Protection Fault",
"Exception OE", "Spool32",
or "Illegal Operation"
messages appear.
N : Refer to the Microsoft Windows 98/Me/NT 4.0/2000/XP User's Guide that came
OTE
with your PC for further information on Windows error messages.
LED
pattern
• You pressed the
was receiving data.
• In Manual Feed mode, there is no paper in the
Tray 1. Load paper into the Tray 1.
• If the printer is receiving data, the
slowly blinks green.
• If the printer is printing the received data, the
• If the installed toner cartridge is empty, the
cartridge. To replace the toner cartridge, see
"Installing the Toner Cartridge" on page 2.4.
• If you have installed a toner cartridge that is not
designed for the printer, the
orange and red in turn. Install a correct toner
cartridge.

Common Windows Problems

Possible Cause and Solution
Exit all software applications. Remove all software from the
StartUp Group, then restart Windows. Reinstall the printer
driver.
• Ensure that the cables are connected correctly, and the
printer is on.
• If bi-directional communication is not turned on in the
driver, it will also cause this message.
Close all other applications, reboot Windows, and try
printing again.
Possible Problems and Solutions
button while the printer
LED blinks green fast.
LED blinks orange. Replace the toner
LED
LED blinks
S 6.19
OLVING PROBLEMS
6