Xerox 3150 - Phaser B/W Laser Printer User Manual page 50

5
Slide the paper width guide and adjust it against the stack
of print material without bending.
N : Your printer cannot automatically detect the size of paper
OTE
loaded in the Tray 1. Loading the Tray 1 with the correct paper size
allows you to select paper by size rather than paper source when
you print from your software application. You do not have to check
which paper is loaded in the Tray 1 before printing.
6
When you print a document, select the paper source and
type in the software application.
7
After printing, push the extender back to its place and close
the Tray 1.
U P M
SING RINT ATERIALS
3
3.11