Main feeder assembly
Warning
Switch off the power and disconnect the power cord.
1.
Remove the front cover as described on page 90. Also remove the
right-front cover.
2.
Remove the rear cover as described on page 89.
3.
Remove the rear shield plate as described on page 97.
4.
Disconnect the seven wiring harnesses leading to the main feeder assembly.
5.
Remove the main feeder cross brace; it is held in place with five screws.
6.
Remove the six screws securing the main feeder assembly. Pull out the
assembly.
0725-66
Removing the main feeder assembly
Paper tray lift motor
1.
With the main feeder assembly removed, disconnect the wiring harness
from the paper tray lift motor.
2.
Remove the three screws securing the lift motor to the assembly.
118
Phaser 2135 Color Printer
Remove Screws
Remove Screws
Paper Tray Lift Motor