When Pictbridge Printing Does Not Work - Ricoh Aficio SP C811DN Software Manual

When PictBridge Printing Does Not Work

This section explains likely causes and possible solutions for problems that can occur when PictBridge
printing.
Problem
PictBridge is not available.
When two or more digital cam-
eras are connected, the second
and subsequent cameras are not
recognized.
Printing is disabled.
Printing is disabled.
Printing is disabled.
Cause
There is a problem with the USB
connection or the PictBridge set-
tings.
You have connected multiple
digital cameras.
The number of originals exceeds
the maximum number of pages
that can be printed at a time.
There is no paper of the specified
size remaining.
The paper size setting for this tray
cannot be printed on the printer.
When PictBridge Printing Does Not Work
Solution
Use the following procedure to
check the connection and set-
tings:
1. Disconnect and then recon-
nect the USB cable.
2. Check the PictBridge set-
tings are enabled.
3. Disconnect the USB cable,
and then turn off the printer.
Turn the printer back on.
When the printer has fully
booted up, reconnect the
USB cable.
Connect one digital camera only.
Do not connect multiple cameras.
The maximum specifiable print
quantity at a time is 999. Respec-
ify the quantity to 999 or less,
and then retry printing.
There is no paper of the specified
size remaining.
If you have to use paper that is
not of the specified size, perform
Form Feed. To cancel printing,
perform Job Cancel.
Select the paper size setting that
can be printed on the printer.
4
149