Paper Type; Fit To Paper; Print Mode - Ricoh Aficio SP 4310N Software Manual

Printing a selected Stored Print file
To print a saved job, use the printer's control panel. For details, see p.75 "Printing a Stored Print file
using the control panel".
Deleting a selected Stored Print file
If you want to delete a saved job, see p.76 "Deleting Stored Print files".

Paper Type

Use this to select the paper type.
The following shows where you can select this function.
[Paper Type] is displayed under [General 1] in the [Feature Sets:] list on [Printer Features] in the print dialog
box.

Fit to Paper

When the size of the document and paper size differ, set whether or not to print according to paper size.
The following shows where you can select this function.
[Fit to Paper] is displayed under [General 1] in the [Feature Sets:] list on [Printer Features] in the print dialog
box.
Prompt User
Print is performed with the size of document to be printed unchanged.
Nearest Size and Scale
If the paper size is smaller than the selected paper size, the driver reduces the print size.
If the paper size is larger than the size of document to be printed, print is not to fit the paper size.
Nearest Size and Crop
Print is performed regardless of any differences between selected and actual paper size. However,
the print output is not adjusted to fit the paper size.

Print Mode

Use this mode to select the print mode you want to use.
[Print Mode] is displayed under [General 1] in the [Feature Sets:] list on [Printer Features] in the print dialog
box.
Off
Prints in normal quality.
Using PostScript 3
7
169