Left Crankcase Cover Removal And Installation - Eton VECTOR ST 250 Service Manual

8-4 Left Crankcase Cover
Clamp strips
Left crankcase cover removal
Release the 2 clamp strips of left crankcase cover
ducts, and then remove the ducts.
Remove left crankcase cover. (9 bolts)
Remove 2 dowel pin and gasket.
9 bolts
Left crankcase cover install
Install left crankcase cover in the reverse
procedures of removal.
Dowel pins
Dowel pins
Left cover plate
Bearing setting plate
Drive shaft holder bearing
Left cover plate gasket
60