Throttle Housing Disassembly; Removal Of Kingpin And Tie-Rod - Eton VECTOR ST 250 Service Manual

13.4 THROTTLE HOUSING
DISASSEMBLY
Loosen the screws on the throttle housing cover.
Remove throttle housing cover and gasket.
Disconnect throttle cable from the throttle arm
and remove from the throttle housing.
NOTE:
Assembly is in the reverse order of disassembly.
13.5 STEERING SYSTEM

Removal of Kingpin and Tie-rod

Remove the front wheels and
Remove the four self-lock nuts from the tie-rod ball joints
and take off the two tie-rods.
hub assy.
Tie-rod
Screws
Bolts
118
Bolts