Eton VECTOR ST 250 Service Manual page 11

Inspect the rear brake lever and cable for excessive
play or other damage.
Replace or repair if necessary.
Measure the free play of the rear brake lever at the
end of the lever.
The standard is 15-25 mm.
NOTE:
The second method to adjust brake level is under the
driver seat and rear brake component.
Because the brake system is different, ones need to adjust it
to reach a proper brake level.
2.11 WHEELS AND TIRES
Inspect the tire surfaces for cuts, nails or other
sharp objects.
Check the each tire surface at cold tire condition.
*The standard of tire pressure is 12(0.8)
Brake level
Rear Brake
Front Brake
psi ( kgf/cm )
2
11
Adjustment
Adjustable nut
Parking Brake Adjustable nut